Model ME 408, designed specifically for testing elastomeric bearings.
Combined compression and shear testing machine, specific for elastomeric bearings used in large structures and bridges.
Two 6 MN axial load actuators, speed up to 220 mm/min.
One 1.5 MN lateral load actuator, speed up to 800 mm/min.
Hydraulic operating principle.
Force measurement by load cell and pressure sensors.
Displacement measurement with linear sensors.
For tests according to UNE-EN 1337:3.
Static tensile, compression and bending tests.
Load capacity between 1 and 300 KN.
Testing speed up to 1000 mm/min.
Testing of all types of materials.
Electromechanical operating principle, 1 ball screw.
Force measurement by load cell.
Displacement measurement by digital encoder.
They can be equipped with any accesory or fixture.
Static and dynamic tests for large structures, automotive, aeronautical and naval components, furniture, couplings and trailers, track testing, etc.
Vibration testing for loads and packaging.
Specific designs adapted to each project.
Assembly of linear or rotary actuators, vertical or horizontal, acting with or without synchronism.
Great versatility.
Load capacity up to 2500KN.
Other capacities on request.
Possibility of incorporating clamps, plates, bending accessories, extensometry, chambers and ovens, etc.
Static tensile, compression and bending tests.
Load capacity between 1 and 500 KN.
Testing speed up to 1000 mm/min.
High deformation.
Load bridge travel up to 1200 mm.
Tests for all types of materials.
Electromechanical operating principle, 2 ball screws.
Force measurement by load cell.
Displacement measurement by digital encoder.
They can be equipped with any accesory or fixture.
For straightening of bar from coils.
Manual and automatic version.
Capabilities for straightening diameters from Ø 8 to Ø 24.
Complies with the Structural Concrete Instruction. Annex 23.
