We have a wide range of accessories for testing under the railway sector standards.
We have a wide range of accessories for testing under standard in the railway sector. We are in permanent contact with research centers and manufacturers to collaborate in the development of new products according to the demands of the sector.
Torque tests.
Torque application capacity between 10 and 5000 N·m.
Testing speed up to 500 rpm.
Tests on wire drawing, wires, cables, screws, biomaterials, automotive, aeronautics, railway, naval, etc.
Servomotor drive. Torque measurement with a torque cell.
Measurement of rotation and angle with digital encoder.
Possibility of incorporating customized clamps, continuity break detectors, pre-stressing accessories, extensometers, etc.
Static and dynamic tests for large structures, automotive, aeronautical and naval components, furniture, couplings and trailers, track testing, etc.
Vibration testing for loads and packaging.
Specific designs adapted to each project.
Assembly of linear or rotary actuators, vertical or horizontal, acting with or without synchronism.
Great versatility.
Load capacity up to 2500KN.
Other capacities on request.
Possibility of incorporating clamps, plates, bending accessories, extensometry, chambers and ovens, etc.
Static tensile, compression and bending tests.
Load capacity between 1 and 500 KN.
Testing speed up to 1000 mm/min.
High deformation.
Load bridge travel up to 1200 mm.
Tests for all types of materials.
Electromechanical operating principle, 2 ball screws.
Force measurement by load cell.
Displacement measurement by digital encoder.
They can be equipped with any accesory or fixture.
Static tensile, compression, bending tests.
Cyclic tests up to 5 Hz.
Load capacity between 400 and 3000 KN.
Testing speed up to 200 mm/min.
Tests for all types of materials.
Servo-hydraulic operating principle.
Force measurement by load cell.
Displacement measurement by SSI linear sensor.
They can be equipped with any accesory or fixture.
