Model ME 408, designed specifically for testing elastomeric bearings.
Testing machine for combined compression and shear, specifically for elastomeric bearings used in large structures and bridges.
Two axial load actuators of 6 MN, speed up to 220 mm/min.
One lateral load actuator of 1.5 MN, speed up to 800 mm/min.
Hydraulic operating principle.
Force measurement using load cell.
Displacement measurement using linear sensors.
For testing according to UNE-EN 1337:3.
For marking smooth or ribbed bars of any diameter, for subsequent tensile testing.
Marks on the specimen visible to any extensometer.
Selectable distance between marks.
Manual and automatic version.
Cutting area: allows up to 9 selectable diameter sizes
Possibility to include a second interchangeable cutting accessory for another 9 diameters.
Upsetting area: allows for upsetting samples with selectable, programmable height.
Servo control via programmable logic controller (PLC).
Automatic safety door locking.
Static compression and flexion tests.
Load capacity between 1 and 300 KN.
Testing speed up to 1000 mm/min.
Testing of all types of materials.
Electromechanical operating principle, 1 ball screw.
Force measurement using load cell.
Displacement measurement using a digital encoder.
Possibility of incorporating any accessory.
Rotation/Torsion tests.
Torque application capacity between 10 and 5000 N·m
Test speed up to 500 rpm.
Testing of drawn wires, cables, fasteners, biomaterials, automotive, aerospace, railway, naval, etc
Driven by a servomotor.
Measurement of applied torque by torque cell.
Rotation and angle measurement by digital encoder.
Possibility to incorporate custom grips, continuity break detectors, pretensioning accessories, extensometers, etc.