ME 402

Servosis - Products - Testing machines - Universal tensile-compression machines - ME 402

ME 402

Static tensile, compression and flexural tests.

Categories: ,

Description

Static tensile, compression and bending tests.

Load capacity between 1 and 300 KN

Testing speed up to 1000 mm/min

Tests for all types of materials:

  • Metals.
  • Plastics.
  • Wood.
  • Insulating materials.
  • Rubber.
  • Composites.
  • Construction materials.
  • Cements
  • Masonry
  • Paper, cardboard.
  • Biomaterials.

Electromechanical working principle, 1 ball screw.

Force measurement by load cell.

Displacement measurement by digital encoder.

Possibility of incorporating all types of accessories:

  • Tensile grips.
  • Tooling for bending tests.
  • Tooling for compression tests.
  • Extensometry.
  • Air-conditioned tests.

Productos Relacionados

  • MT SERIES

    Torque tests.

    Torque application capacity between 10 and 5000 N·m.

    Testing speed up to 500 rpm.

    Tests on wire drawing, wires, cables, screws, biomaterials, automotive, aeronautics, railway, naval, etc.

    Servomotor drive. Torque measurement with a torque cell.

    Measurement of rotation and angle with digital encoder.

    Possibility of incorporating customized clamps, continuity break detectors, pre-stressing accessories, extensometers, etc.

    Download PDF

  • MUE 403

    Static tensile, compression, bending tests.

    Cyclic tests up to 5 Hz.

    Load capacity between 50 and 1000 KN.

    Testing speed up to 200 mm/min.

    Tests for all types of materials.

    Servo-hydraulic operating principle.

    Force measurement by load cell.

    Displacement measurement by SSI linear sensor.

    They can be equipped with any accesory or fixture.

    Download PDF
  • me-406 Single-actuator portico

    ME-406

    Static and dynamic tests for large structures, automotive, aeronautical and naval components, furniture, couplings and trailers, track testing, etc.

    Vibration testing for loads and packaging.

    Specific designs adapted to each project.

    Assembly of linear or rotary actuators, vertical or horizontal, acting with or without synchronism.

    Great versatility.

    Load capacity up to 2500KN.

    Other capacities on request.

    Possibility of incorporating clamps, plates, bending accessories, extensometry, chambers and ovens, etc.

    Download PDF
  • ME-408

    ME-408

    Combined compression and shear testing machine, specific for elastomeric bearings used in large structures and bridges.

    Two 6 MN axial load actuators, speed up to 220 mm/min.

    One 1.5 MN lateral load actuator, speed up to 800 mm/min.

    Hydraulic operating principle.

    Force measurement by load cell and pressure sensors. Displacement measurement with linear sensors.

    For tests according to UNE-EN 1337:3.

    Download PDF
    • CAN'T FIND WHAT YOU ARE LOOKING FOR?
    Request more information
    MORE INFORMATION