Model ME 408, designed specifically for testing elastomeric bearings.
Testing machine for combined compression and shear, specifically for elastomeric bearings used in large structures and bridges.
Two axial load actuators of 6 MN, speed up to 220 mm/min.
One lateral load actuator of 1.5 MN, speed up to 800 mm/min.
Hydraulic operating principle.
Force measurement using load cell.
Displacement measurement using linear sensors.
For testing according to UNE-EN 1337:3.
Dynamic testing of tension, compression, and bending.
Cyclic testing up to 5 Hz.
Load capacity between 1 and 500 KN
Testing speed up to 200 mm/min.
Possibility to synchronize temperature and testing controls.
Testing of soils, asphalt, rubber, automotive, railway, and aerospace. Servo-hydraulic operating principle
Force measurement using load cell.
Displacement measurement using an SSI linear sensor.
Possibility to incorporate climate chambers, extensometry, grips, and any accessory.
Static compression and flexion tests.
Load capacity between 1500 and 8000 KN
Testing speed up to 200 mm/min.
Standardized cubic or cylindrical specimen.
Testing of concrete, rocks, prefabricated elements, pipes, rubber, wood, packaging, plastics, etc
Servo-hydraulic operating principle
Force measurement using load cell.
Displacement measurement using an SSI linear sensor.
Possibility to incorporate any compression plate, bending devices, climate chambers, or any type of specific accessory or tooling.
Combined torsion + tensile test on shock absorbers...
Torque application capacity up to 500 N-m
Test speed up to 200 rpm
Tensile load capacity up to 1 ton.
Driven by a servomotor.
Traction by hydraulic linear servo actuator.
Force measurement using load cell.
Axial force measurement by load cell.
Rotation and angle measurement by digital encoder.
Static and dynamic testing for large structures, automotive components, aerospace and naval industries, furniture, hitches and trailers, track testing, etc.
Vibration testing for loads and packaging.
Specific designs tailored to each project. Installation of linear or rotary actuators, vertical or horizontal, operating with or without synchronization.
Great versatility.
Load capacity up to 2500KN
For other capabilities, please inquire.
Possibility to incorporate grips, plates, bending accessories, extensometry, chambers, ovens, etc.