MUF 401

Servosis - Products - MUF 401
MUF 401

MUF 401

DYNAMIC Tensile, compression and flexural tests.

Categories: ,

Description

DYNAMIC Tensile, compression, flexural tests

Cyclic testing up to 5 Hz.

Load capacity between 10 and 500 KN

Velocidad de ensayos hasta 200 mm/min

Possibility to synchronize temperature and testing controls.

Ensayos para todo tipo de materiales:

  • Metales.
  • Plásticos.
  • Maderas.
  • Aislantes.
  • Caucho.
  • Composites.
  • Biomateriales.
  • Bituminous Mixtures

Servo-hydraulic operating principle

Force measurement using load cell.

Displacement measurement using an SSI linear sensor.

Posibilidad de incorporar todo tipo de accesorios:

  • Mordazas de tracción.
  • Utillaje para ensayos a flexión.
  • Utillaje para ensayos a compresión.
  • Extensometry.
  • Ensayos climatizados.

Related Products

  • ME-408

    ME-408

    Testing machine for combined compression and shear, specifically for elastomeric bearings used in large structures and bridges.

    Two axial load actuators of 6 MN, speed up to 220 mm/min.

    One lateral load actuator of 1.5 MN, speed up to 800 mm/min.

    Hydraulic operating principle.

    Force measurement using load cell.

    Displacement measurement using linear sensors.

    For testing according to UNE-EN 1337:3.

    Download PDF
  • Single-actuator portico

    ME-406

    Static and dynamic testing for large structures, automotive components, aerospace and naval industries, furniture, hitches and trailers, track testing, etc.

    Vibration testing for loads and packaging.

    Specific designs tailored to each project. Installation of linear or rotary actuators, vertical or horizontal, operating with or without synchronization.

    Great versatility.

    Load capacity up to 2500KN

    For other capabilities, please inquire.

    Possibility to incorporate grips, plates, bending accessories, extensometry, chambers, ovens, etc.

    Download PDF
  • Manual straightening machine EBM

    BAR STRAIGHTENER

    For straightening bars from coils.

    Manual and automatic version.

    Capabilities to straighten diameters from Ø 8 to Ø 24.

    Complies with the Structural Concrete Instruction. Annex 23.

    Download PDF
  • MUF 404

    MUF 404

    Static compression and flexion tests.

    High-capacity cyclic testing for simulating seismic behavior.

    Tension-compression testing with zero-crossing.

    Load capacity between 10 and 2000 kN.

    Testing speed up to 200 mm/min.

    Cyclic tension-compression testing.

    Testing of smooth and ribbed steel bars.

    Servo-hydraulic operating principle

    Force measurement using load cell.

    Displacement measurement using an SSI linear sensor.

    Possibility of incorporating any accessory.

    Download PDF