Description
Aging bath using water at controlled temperature.
Customizable dimensions. Allows the aging of bars of any length.
Temperature control up to 100°C.
Possibility of PC connection for control and event logging.
AGING TABLE
Aging bath using water at controlled temperature.
Related Products
Static compression and flexion tests.
Load capacity between 1 and 300 KN.
Testing speed up to 1000 mm/min.
Testing of all types of materials.
Electromechanical operating principle, 1 ball screw.
Force measurement using load cell.
Displacement measurement using a digital encoder.
Possibility of incorporating any accessory.
Testing machine for combined compression and shear, specifically for elastomeric bearings used in large structures and bridges.
Two axial load actuators of 6 MN, speed up to 220 mm/min.
One lateral load actuator of 1.5 MN, speed up to 800 mm/min.
Hydraulic operating principle.
Force measurement using load cell.
Displacement measurement using linear sensors.
For testing according to UNE-EN 1337:3.
Dynamic testing of tension, compression, and bending.
Cyclic testing up to 5 Hz.
Load capacity between 1 and 500 KN
Testing speed up to 200 mm/min.
Possibility to synchronize temperature and testing controls.
Testing of soils, asphalt, rubber, automotive, railway, and aerospace. Servo-hydraulic operating principle
Force measurement using load cell.
Displacement measurement using an SSI linear sensor.
Possibility to incorporate climate chambers, extensometry, grips, and any accessory.
Rotation/Torsion tests.
Torque application capacity between 10 and 5000 N·m
Test speed up to 500 rpm.
Testing of drawn wires, cables, fasteners, biomaterials, automotive, aerospace, railway, naval, etc
Driven by a servomotor.
Measurement of applied torque by torque cell.
Rotation and angle measurement by digital encoder.
Possibility to incorporate custom grips, continuity break detectors, pretensioning accessories, extensometers, etc.