Description
For straightening bars from coils.
Manual and automatic version.
Capabilities to straighten diameters from Ø 8 to Ø 24.
Complies with the Structural Concrete Instruction. Annex 23.
BAR STRAIGHTENER
For straightening bars from coils.
Related Products
Dynamic testing of tension, compression, and bending.
Cyclic testing up to 5 Hz.
Load capacity between 1 and 500 KN
Testing speed up to 200 mm/min.
Possibility to synchronize temperature and testing controls.
Testing of soils, asphalt, rubber, automotive, railway, and aerospace. Servo-hydraulic operating principle
Force measurement using load cell.
Displacement measurement using an SSI linear sensor.
Possibility to incorporate climate chambers, extensometry, grips, and any accessory.
Static compression and flexion tests.
High-capacity cyclic testing for simulating seismic behavior.
Tension-compression testing with zero-crossing.
Load capacity between 10 and 2000 kN.
Testing speed up to 200 mm/min.
Cyclic tension-compression testing.
Testing of smooth and ribbed steel bars.
Servo-hydraulic operating principle
Force measurement using load cell.
Displacement measurement using an SSI linear sensor.
Possibility of incorporating any accessory.
Static compression and flexion tests.
Load capacity between 1 and 500 kN.
Testing speed up to 1000 mm/min.
High deformation
High deformation. Load bridge travel up to 1200 mm.
Testing for all types of materials.
Electromechanical operating principle, 2 ball screws.
Force measurement using load cell.
Displacement measurement using a digital encoder.
Possibility of incorporating any accessory.
Testing machine for combined compression and shear, specifically for elastomeric bearings used in large structures and bridges.
Two axial load actuators of 6 MN, speed up to 220 mm/min.
One lateral load actuator of 1.5 MN, speed up to 800 mm/min.
Hydraulic operating principle.
Force measurement using load cell.
Displacement measurement using linear sensors.
For testing according to UNE-EN 1337:3.