Frequently Asked Questions Products
Servosis machines allow for testing metals, concrete, rocks, plastics, elastomers, composite materials, etc., adapting the load ranges, speed and type of effort according to the material and the test standard.
The static they perform tensile or compression tests at a constant speed, while the dynamics or fatigue applications cyclic loads to study the material's resistance to repeated stresses.
The difference lies in the ability to reproduce fast movements during testing; while static machines can perform low-speed fatigue tests (usually up to 200 mm/min), dynamic machines can reach much higher speeds and accelerations, and operate at much higher frequencies (up to 200 Hz).
It depends on the type of material, the maximum load and the type of test. Servosis studies each case individually. recommend the appropriate model (universal, torsion, compression, etc.) according to the customer's standard or technical requirement.
The proprietary software of Servosis allows schedule tests, control loads or displacements, record data and generate automatic reports, guaranteeing traceability and precision.
Yes. The Servosis machines incorporate automatic servo-hydraulic or electronic control systems, These allow the execution of load sequences, cycles and measurements without manual intervention.
The extenso meters, load cells and clamps They are key accessories for measuring deformations, applying precise forces, and ensuring the proper clamping of the probe during the test.
The video extensometers They measure deformation without physical contact, which prevents damage to the sample and improves accuracy in sensitive or deformable materials.
Yes. The climate chambers and furnaces They allow materials to be tested at specific temperatures, simulating extreme conditions of use or environment.
They are accessories that allow to test pieces subjected to bending loads (such as elongated beams or test pieces), determining their strength, rigidity and elastic limit.
Yes. Servosis manufactures and equips devices for bituminous mixtures, Ideal for paving or civil engineering laboratories that analyze asphalt and mixtures.
It is a team designed for check the load capacity, deformation and recovery of the structural supports used in bridges and buildings.
Servosis offers aged machines, straightened samples, marked and cut and polished, as well as teams of Preparation of metallic samples for traction, ensuring uniformity before the test.
Yes. The Servosis hydraulic actuators They can be integrated into other brands’ pannels or test benches, with electronics and controls adaptable to different configurations.
Yes. Through the service Upgrading old machines, Servosis modernizes controls, sensors, and software for already installed equipment, improving its performance without replacing the entire structure.
You can contact them directly from the page Products or Contact, Indicate the type of material you wish to test or the machine of interest. The technical team will send you a proposal tailored to your requirements.